Philips CD175 - Manual (Page 35)

35
Behavior of the LED key on
the base station
The table below shows you the current status
with different LED key behavior on the base
station.
Answering
machine
status
Message status LED key on the
base station
Off - Off
On No new message On
On New message Flashing
On Message full Flashing
quickly
On Recording
incoming
message
Flashing
On Registration
mode
Flashing
Remote access commands
Key Function
1 Repeat the current or listen to
the previous message.
2 Listen to messages.
3 Skip to the next message.
6 Delete the current message.
7 Switch the answering machine
on.
(not available when you listen to
the messages).
8 Stop listening to the message.
9 Switch the answering machine
off.
(not available when you listen to
the messages).
Call screening
You can hear the caller while he is leaving a
message. Press to pick up the call.
From the base
Press / to adjust the speaker volume
during call screening. The lowest volume level
turns off the call screening.
English
EN
IFU_CD170-175_05_EN.indd 35 2009-12-17 17:30:43