Philips CD175 - Manual (Page 33)

33
From the handset
1
When [NEW MESSAGE] displays on the
handset screen, press OK to listen to the
new messages.
2
Press / to increase/decrease the
volume.
Note
You can listen to the old messages through the •
base station only.
Delete an incoming message
From the base
1
Press when you listen to the message.
The current message is deleted. »
Delete all old incoming messages
From the base
1
Press and hold in standby mode.
All old messages are permanently »
deleted.
Set the ring delay
You can set the number of times the phone
rings before the answering machine picks up
the call.
1
Press MENU.
2
Select [ANSW MACHINE] >
[SETTINGS] > [RING DELAY], then
press OK to confirm.
3
Select a new setting, then press OK to
confirm.
The setting is saved. »
Incoming messages (ICM)
Each message can be up to 3 minutes long.
When you receive new messages, the new
message indicator flashes on the answering
machine and the handset displays a notification
message.
Note
If you pick up the phone when the caller leaves •
a message, the recording stops and you can
talk to the caller directly.
Note
If the memory is full, the answering machine •
switches to [ANSWER ONLY] automatically.
Delete old messages to receive new ones.
Listen to the incoming messages
You can listen to the incoming messages in the
sequence they are recorded.
From the base
Start/Stop listening: Press • .
Adjust the volume: Press • / .
Skip backward: •
- When you listen to the messages, press
to listen to the message from the
beginning.
- During the first second of the current
message, press to listen to the
previous message.
Skip forward: Press • to skip to the next
message.
Delete the current message: Press
• .
Note
No deleted messages can be recovered. •
English
EN
IFU_CD170-175_05_EN.indd 33 2009-12-17 17:30:43