Pella 80WX0101 - Manual (Page 8)

LOCK LEVER REMOVAL AND INSERTION
Note: You may want to remove the lock lever prior to finishing the window, or if it
needs to be replaced with a lock lever in a different finish.
Interior
B
Exterior C
Interior F Exterior
D
E
A. Unlock and open the window.
B. Place the lock lever in the locked
position.
C. From the exterior of the window,
insert a small flat-blade screwdriver
between the cam and lock lever near the
bottom of the opening between the stop
and frame gasket.
D. Push the screwdriver inwards with
a small amount of pressure; then turn
the blade slightly clockwise for a left
hand unit, counter-clockwise for a right
hand units. DO NOT over-twist the
screwdriver, this can damage the lock
driver.
Note: This will release the hook in the
lever from the cam hook.
E. Remove the lock lever by pulling it
toward the interior of the building.
F. To install a lock lever, hold it in the lock
position and insert it, from the interior,
into the slot until it snaps into the cam.