Premio Computer Premio Apollo/Shadowhawk Computer - Manual (Page 97)

CHAPTER 4 AWARD
®
BIOS SETUP
4-10
Boot Up NumLock Status
The default value is On.
On (default)
Keypad is numeric keys.
Off Keypad is arrow keys.
Gate A20 Option
Normal The A20 signal is controlled by keyboard
controller or chipset hardware.
Fast(default) The A20 signal is controlled by port 92 or
chipset specific method.
Typematic Rate Setting
Key strokes repeat at a rate determined by the keyboard controller.
When enabled, the typematic rate and typematic delay can be selected.
The settings are Enabled and Disabled.
Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a key stroke when you
hold the key down. The settings are 6, 8, 10, 12, 15, 20, 24 and 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to
repeat the keystroke The settings are 250, 500, 750 and 1000.