Panasonic KX-TCD735ALM - Manual (Page 58)

Tone Option
58
1 Press .
2 Press or until the arrow points
to “ Setting Handset ”, then press
.
3 Press or until the arrow points
to “ Tone Option ”, then press .
4 Press or until the arrow points
to “ Range Alarm ”, then press .
•
The arrow points to the current setting.
5 Press or to select “ ON ” or
“ OFF ”.
6 Press .
•
A beep sounds.
•
The display will return to “ Range
Alarm ”. To return to the standby mode,
press or wait for 60 seconds.
•
You can exit the programming mode any time
by pressing
.
with the Handset
Setting the Range Warning Alarm ON/OFF
The factory preset is OFF.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
Setting the Battery Low Alarm ON/OFF
The factory preset is ON.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1 Press .
2 Press or until the arrow points
to “ Setting Handset ”, then press
.
3 Press or until the arrow points
to “ Tone Option ”, then press .
4 Press or until the arrow points
to “ Battery Alarm ”, then press .
•
The arrow points to the current setting.
5 Press or to select “ ON ” or
“ OFF ”.
6 Press .
•
A beep sounds.
•
The display will return to “ Battery
Alarm ”. To return to the standby mode,
press or wait for 60 seconds.
•
You can exit the programming mode any time
by pressing
.
KX-TCD735ALM(E)-3(50~75) 2002.06.21 5:24 PM Page 58