Panasonic KX-TCD735ALM - Manual (Page 32)

32
J o h n M i l l e r
< E n t e r P h o n e N o >
< E n t e r N a m e >
Phonebook
You can store up to 200 names and phone numbers in the handset phonebook. All phonebook items
are automatically stored by the first word in alphabetical order.
If you receive a call from the same phone number you stored with name in the phonebook, the display
will show the caller name and phone number (p. 26).
You can categorise the items in the handset phonebook up to 9 categories, then you can select one of
3 display backlight colours and one of 20 ringer types for each private category–Private Category
Feature (p. 33). You can store names and phone numbers in the base phonebook up to 20 and record
the audible caller ring for each item–Audible Caller Ring Feature (p. 40)
You can make a call with the phonebook (p. 39, 42).
with the Handset
Storing Names and Phone Numbers into the Handset Phonebook
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1 Press .
2 Press or until the arrow points
to “ New Phonebook ”, then press .
3 Press or until the arrow points to
“ H/set Phonebook ”, then press .
•
The display shows the number of
remaining phonebook items, then
“
”.
4 Enter a name up to 16 characters with
the keypad,
, or .
•
To select characters, see page 35.
5 Press .
•
“ ” is displayed.
C
6 Enter a phone number, up to 24 digits.
•
Pressing erases the digit to the left of
the cursor. To erase all digits, press and
hold .
7 Press .
8 Press or to select the desired
private category number 1 to 9 or OFF,
then press .
9 While “ Save ” is at the arrow, press .
•
A beep sounds and “ Saved ” is displayed.
•
The display will return to “
Name> ”. You can continue the storing
procedure begin with step 4. To return to
the standby mode, press
or wait for
60 seconds.
C
C
•
If a pause is required for dialling, press .
A pause can be stored in a phone number
counting as one digit (p. 48).
•
You can exit the programming mode any time
by pressing
.
•
If the display shows “ Memory Full ” in step
2, the display will return to the standby mode.
You must clear the other caller information in
the phonebook (p. 38).
E n t e r
N e w P h o n e b o o k
2 0 0 - M e m o r y A v a i l
KX-TCD735ALM(E)-2(32~49) 2002.06.21 5:02 PM Page 32