Panasonic KX-TCD735ALM - Manual (Page 52)

52
with the Handset
Changing the 4-digit Handset PIN
You can program a 4-digit handset PIN (Personal Identification Number). The factory preset is 0000.
Changing the PIN may prevent the unauthorized use of your unit by another person.
Handset PIN
1 Press .
2 Press or until the arrow points
to “ Setting Handset ”, then press
.
3 Press or until the arrow points
to “ Other Option ”, then press .
4 Press or until the arrow points
to “ Change Hset PIN ”, then press
.
5 Enter the current 4-digit handset PIN.
•
The factory preset is 0000.
6 Enter the new 4-digit handset PIN
TWICE.
•
If you misdial, press . Digits are
erased from the right. To erase all digits,
press and hold
. C
C
•
If 5 beeps sound in step 5, the entered 4-digit
handset PIN is incorrect. Enter the correct
PIN.
Once you have programmed the 4-digit Handset PIN, you cannot confirm it. We recommend you to
write down your 4-digit Handset PIN. If you forget it, please consult with Panasonic’s Customer
Care Centre.
•
A beep sounds.
•
To return to the standby mode, press
or wait for 60 seconds.
1st
2nd
E n t e r O l d P I N
1 2 3 4 5 6 7 8 9 0 : ----
E n t e r N e w P I N
1 2 3 4 5 6 7 8 9 0 : ----
V e r i f y N e w P I N
1 2 3 4 5 6 7 8 9 0 : ----
You need to enter the 4-digit handset PIN for the following functions.
— To set the call prohibition mode ON/OFF (p. 62).
— Reset Handset Settings (p. 65).
— To cancel the base unit (p. 97).
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
4-digit handset PIN
KX-TCD735ALM(E)-3(50~75) 2002.06.21 5:24 PM Page 52