Panasonic KX-F880 - Manual (Page 64)

64
Signaling your pager that you have received a
fax document
This feature allows your unit to call your pager when your unit receives a fax message.
This feature only works with an automatic pager.
1 Press . MENU
2 Press , then . 7 0
3 Press . START/COPY/SET
FAX PAGER
4 Press or to select “ON”.
● If this feature is not required, select “OFF”.
MODE=ON
5 Press . START/COPY/SET
NO.=
6 Enter your pager phone number.
● If this feature does not work properly, press
more than one time at the end
of your pager phone number to extend the paging
time.
If you wish to display a message on your pager,
enter the message after your pager phone
number and
.
Programming methods may vary depending on
the pager company. Contact your pager company
for details.
● You can enter a total of 46 digits and/or pauses.
REDIAL/PAUSE
REDIAL/PAUSE
7 Press . START/COPY/SET
8 Press . MENU
2 3
4 5 6
7 8 9
0
1
MENU Dial keypad
REDIAL/PAUSE
START/COPY/SET
SYSTEM SET UP
MODE=OFF
Display:
Note:
● This feature is not available when the receive mode is
set to the TEL mode.