Panasonic DMC-LC5PP - Manual (Page 79)

79
Using the Auto Review
Recording with the auto review set to [ON],
the recorded picture is automatically
displayed on the LCD monitor for about 2
seconds.
[Preparation]
Set the operational mode dial to REC
mode (single mode [
] or burst mode
[ ]).
1
Press the [MENU] button.
2
Press 1 to open the setup menu.
3
Press 3/4 to select [AUTO
REVIEW].
4
Press 2/1 to select [ON].
5
Press the [MENU] button.
• The menu will disappear.
• In burst mode [ ], auto bracket or focus bracket, only the first recorded
picture is displayed.
• Although setting the auto review to [ON], it is not available in motion image
mode [ ].
• When recording in burst mode [ ], auto bracket, focus bracket, TIFF or still
picture with audio modes, the auto review is set to [ON].
REC SETUP
MONITOR
AUTO REVIEW
BEEP
POWER SAVE
NO. RESET
CLOCK SET
SELECT: SET EXIT
2 MIN.