Panasonic DMC-LC5PP - Manual (Page 27)

27
Setting the Date/Time (Clock Set)
It is possible to set the year from 2001 to
2099. The 24-hour system is used.
1
Press the [MENU] button.
2
Press 1 to make the setup menu
appear.
3
Press 3/4 to select [CLOCK SET],
and then press 1.
4
Press 3/4 to select [M/D/Y] or [D/
M/Y], and then press 1.
5
Press 3/4/2/1 to set date and
time.
6
Press the [MENU] button twice.
• The menu will disappear.
7
Check if the date/time setting is
displayed correctly, after turning the
camera [OFF] and [ON].
• Even if the battery is not inserted or the
AC adaptor is not connected, the camera
can store the correct time for about 5
hours with its backup built-in-power
source. But, after about 5 hours the set
time is cancelled, so set date and time
again.
REC SETUP
MONITOR
AUTO REVIEW
BEEP
POWER SAVE
NO.RESET
CLOCK SET
SELECT SET EXIT
CLOCK SET
SELECT SET EXIT
2 MIN.