Pentax L - Manual (Page 188)

186
6
Appe
ndix
Error Messages
Error Message Description
Memory card full
The SD Memory Card is full and no more images
can be saved. Insert a new SD Memory Card or
delete unwanted images. (p.29, p.73)
You may be able to save new images by
changing the quality level or recorded pixels.
(p.109, p.110)
No image
There are no images for playback on the SD
Memory Card.
Camera cannot display this
image
You are trying to play back an image in a format
not supported by this camera. You may be able
to play it back on another brand of camera or
your computer.
No card in camera
The SD Memory Card is not inserted in the
camera. (p.29)
Memory card error
The SD Memory Card has a problem, and image
capture and playback are impossible. It may be
viewable on a PC but not the camera.
Card not formatted
The SD Memory Card you have inserted is
unformatted or has been formatted on a
computer or other device and is not compatible
with this camera. Use after formatting with the
camera. (p.162)
Card locked
A locked SD Memory Card is inserted in the
camera. Unlock the SD Memory Card. (p.30)
Card is locked
Rotation information cannot be
saved
This image is protected
Rotation information cannot be
saved
The selected rotated image is protected.
Remove protection from the image. (p.77)
Cannot use this card
The inserted card cannot be used on a camera.
Insert a usable card.
Battery depleted
The batteries are exhausted. Install new
batteries in the camera. (p.25)
Not enough battery remaining
to clean sensor
Appears during CCD cleaning if battery set level
is insufficient. Replace the battery set with a new
one or use an AC adaptor (optional). (p.28)