Philips FW-V39 - Manual (Page 24)

3139 116 19982
24
English
View Clock
You can view the clock (if it is set) if the
system is in Standby mode or when any
sound source is selected (VCD, TUNER,
etc.). The clock will be displayed for about
seven seconds.
• Press CLOCK•TIMER briefly.
™ "10:38 PM or 22:38" (the
current time in either 12- or 24-hour
mode) will be displayed depending
on whether you have selected 12- or
24-hour mode.
™ "--:--" will be displayed if the
clock is not set.
Clock Setting
The clock can be set in either 12- or 24-
hour mode, e.g. "
12:00
AM " or " 00:00".
Before setting the clock, you must be in the
View Clock mode.
1 Press CLOCK•TIMER to select clock
mode.
2 Press PROGRAM to select 12- and 24-
hour mode.
™ If 12-hour mode is selected, "12:00"
starts flashing and the AM lights up.
™ If 24-hour mode is selected, "00:00"
starts flashing.
3 Set the hour with à or á on the
system.
4 Set the minute with í or ë on the
system.
STANDBY-ON
FW- C10 VCD MINI HIFI SYSTEM
C D 1 • 2 • 3 BAND TAPE 1 • 2
TAPE VCD TUNER AUX
3 CD ROTARY CHANGER SYSTEM
•
CD REWRITABLE COMPATIBLE
•
CD SYNCHRO RECORDING
•
D B B
CDR/VIDEO JOG
CONTROL
VOLUME
V E C
D S C
T E C H N O
R O C K
J A Z Z
O P T IM A L
PRESET ▲ ▲ STOP• CLEAR SEARCH•TUNING PLAY• PAUSE PREV NEXT
PROGRAM DIM RECORD DUBBING A.REPLAY INCREDIBLE SURROUND
CLOCK•TIMER
PAL/NTSC
ALBUM MP3-CD + - TITLE + -
RETURN PBC
MICROPHONE - LEVEL
5 Press CLOCK•TIMER again to store the
setting.
™ The clock starts.
• To exit without storing the setting, press
Ç on the system.
Notes:
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
Timer Setting
• The system can switch on to VCD,
TUNER or TAPE 2 mode automatically at
a preset time. It can serve as an alarm
to wake you up.
• Before setting the timer, make sure the
clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the timer will
increase from the minimum level
until the volume level before the set
is switched to standby mode.
1 Press and hold CLOCK•TIMER for more
than 2 seconds to select timer mode.
™ "12:00 AM " or "00:00" or the last
timer setting starts flashing
depending on whether you have
selected 12- or 24-hour mode.
™ The TIMER flag starts flashing.
™ The selected source is lit while other
available sources are flashing.
2 Press VCD, TUNER or TAPE to select
the desired source.
• Before selecting VCD or TAPE, make
sure a disc or tape is loaded in the disc
tray or tape deck 2.
3 Press à or á on the system to set
the hour for the timer to start.
4 Press í or ë on the system to set the
minute for the timer to start.
CLOCK TIMER
pg 01-28/V39/21-En 6/8/01, 9:02 AM 24