Installation, Before installing – Planar LX1201PTI User Manual
Page 10
10
LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0512-01A)
Installation
Before Installing
Keep the following in mind while installing the monitor:
The monitor should be visible to the driver only if it is used for navigation,
•
system control or vehicle information. If the monitor will be used for other
purposes, it should be installed in such a way that it will only operate while the
watercraft is not moving.
Review all applicable federal, state and local laws and regulations to make sure
•
the monitor is used properly and safely.
The installed monitor must not interfere with the driver’s vision.
•
Installing the monitor consists of three steps:
Attaching the monitor using one of the mounting interfaces built into the
1.
monitor’s enclosure.
Connecting the monitor to the computer and power source.
2.
Installing the touchscreen driver software.
3.