Phonetics 2000 - Manual (Page 50)

50
Sensaphone ® 2000 User’s Manual
Alarm Enable/Disable:
This will enable or disable the dialout for this input.
Default setting: Enabled
Alarm Reset Time:
The is the time allowed for an acknowledged alarm’s fault condition
to be corrected before the unit resets (reactivates) the alarm and
begins the dialout process all over again. The default setting for this
parameter is 0 minutes and 0 seconds, meaning that the alarm reset
feature is disabled.
Programmable range: 0 min, 0 sec to 270 min, 0 sec
Default setting: 0 min, 0 sec (disabled)
MONITORS
The Manager 2000 software provides the user with the ability to
monitor all of a CPP Monitor 2000’s inputs in real-time graphical
form. You must be on-line with a unit to monitor its inputs. Once
on-line, you can access real-time input monitoring from the Toolbar
button labeled Monitors.
Displaying Input Monitors
To display a monitor, from the Monitor menu choose File>New,
then select the desired input and monitor type. More than one
monitor may be displayed for each input.