Phonetics 2000 - Manual (Page 42)

42
CPP Monitor 2000 User’s Manual
Alpha Pager Speed
This is the baud rate of the data connection between CPP Monitor
2000 and your alphanumeric pager service.
Programmable settings: 300, 1200, 2400
Default setting: 1200
Maximum Calling Rounds
The maximum number of times CPP Monitor 2000 will dial through
a list of destinations to attempt to deliver either an alarm or a report.
Programmable range: 0 - 100 calling rounds
Default setting: 100 calling rounds
Voice Repetitions
The number of times CPP Monitor 2000 repeats the alarm message
during a dial out alarm call.
Programmable range: 0-10
Default setting: 3
Access:
Acknowledgment Code
This is the code used to acknowledge an alarm via Touch-Tone
telephone.
Programmable range: 0 - 999999 from 1 to 6 digits long. Note: When
using an acknowledgment code with leading zeros, all digits must be
included. If the acknowledgment code is 000888, simply entering
“888” will NOT acknowledge the alarm.
Default setting: 555
Voice Password
CPP Monitor 2000 allows you to record input and ID voice mes-
sages. These messages are protected by the voice password. The
voice password must be entered on a Touch-Tone phone keypad in
order to record voice messages.
Programmable range: 0 - 999999 from 1 to 6 digits long.
Default setting: 555