Polaris 600RR - Manual (Page 31)

28
FEATURES AND CONTROLS
Electronic Reverse (PERCt) (600RR)
Electronic reverse will activate only if the engine RPM is below 4000.
If your machine is running at an altitude of over 6000 feet, adjust the
ignition setting as described below. Always make sure the vehicle is
stopped and the engine is running at idle before shifting to reverse.
WARNING
Improper reverse operation, even at low speeds, may cause loss of
control, resulting in serious injury or death. Damage will occur to the
chaincase or transmission if shifting is attempted when the engine is
operating above idle speed.
Shift to or from reverse only when the snowmobile is stopped and when
engine speed is at idle. Look behind the vehicle before and while
backing. Avoid sharp turns. Apply throttle slowly.
Engaging Reverse
1. Stop the snowmobile and
leave the engine idling.
2. Make sure the area behind
your vehicle is clear.
3. Push the reverse button (1)
on the left-hand control for
one second, then release. The
engine will automatically
reduce RPM and start a
reverse rotation. A flashing
reverse light on the
tachometer will indicate that
the transmission is in
reverse.
4. Apply the throttle slowly to
make sure the transmission is
in reverse.
NOTE: The maximum engine RPM will be 6000 when in reverse.
NOTE: If the engine stops running, the snowmobile will be in forward gear
when it’s restarted.
1