Pentax Optio 330 GS - Manual (Page 23)

v
Press the shutter release button.
The image will be displayed on the LCD monitor for 0.5
seconds (Instant Review) and recorded on the CF card.
(The green and red lamps on the right of the viewfinder
blink alternately while the image is being recorded on
the CF card.)
Using the Shutter Release Button
The shutter release button works in a two-step action.
b
Press halfway
When the shutter release button is pressed lightly
(halfway), the focus, exposure and white balance are
locked.
The shutter speed and aperture settings are only displayed
when the shutter release button is pressed lightly (halfway).
You can find the following information on the LCD monitor,
the status lamp and the flash lamp.
ቢ
Autofocus frame
If the subject is in focus, the frame will light green. If the
subject is out of focus, the frame will not appear.
ባ
Focus status lamp & Flash status lamp
status Focus status lamp (green) Flash status lamp (red)
lit Subject is in focus Flash is charged
blink Subject is out of focus Flash is charging
You cannot take a picture while the flash is charging.
b
Pressed down fully
The picture is taken.
Instant Review
The Instant Review default setting is 0.5 seconds. During this
time you can delete the image by pressing the
button
(The [Delete] menu will be displayed.), and selecting
[Delete], and then pressing the Playback/OK button.
Setting the Instant Review Time
☞
p.44
21
Quic
k Star
t