Pentax Optio 330 GS - Manual (Page 107)

105
Troubleshooting
Appendix
Problem Cause Remedy
Power will not
come on
No image on the
LCD monitor
Shutter release
button will not
release
Battery is not installed Check battery is installed.
If not, install battery.
CF card cover is open Close CF card cover.
Battery is installed
incorrectly Check orientation of battery.
Reinsert battery as indicated by
(+) (–) inside the battery chamber.
(p.10)
Battery power is low
LCD monitor is set to
OFF
Camera is connected
to TV
Image is displayed but
is hard to see
Flash is charging
No available space on
CF card Insert CF card with available
space or delete unwanted images.
(p.13, 74)
When flash lamp blinks red, flash
is charging and no pictures can be
taken. Lamp lights red when
charging is completed.
Insert a new battery or use the AC
adapter.
Press Display button to turn LCD
monitor on. (p.48)
LCD monitor remains off while
camera is connected to TV.
Image on LCD monitor may be
hard to see when taking pictures
outside in sunlight. Adjust the
brightness of the LCD monitor.
(p.101)
Recording Wait until recording is finished.