Panasonic DMR-ES20DEB - Manual (Page 7)

Remote control
Trademark Code Trademark Code Trademark Code Trademark Code
Panasonic
01-04,45 GOLDSTAR/LG 31 MIVAR 24 SALORA 26
AIWA 35 GOODMANS 05,06,31 NEC 36 SAMSUNG 31,32,43
AKAI 27,30 GRUNDIG 09 NOKIA 25-27 SANSUI 05,31,33
BLAUPUNKT 09 HITACHI 22,23,31,40-42 NORDMENDE 10 SANYO 21
SBR 06 BRANDT 10,15 INNO HIT 34 ORION 37
SCHNEIDER 05,06,29-31
BUSH 05,06 IRRADIO 30 PHILIPS 05,06
SELECO 06,25
CURTIS 31 ITT 25 PHONOLA 31,33
SHARP 18
DESMET 05,31,33 JVC 17,39 PIONEER 38 SIEMENS 09
SINUDYNE 05,06,33
DUAL 05,06 LOEWE 07 PYE 05,06
SONY 08
ELEMIS 31 METZ 28,31 RADIOLA 05,06
TELEFUNKEN 10-14
FERGUSON 10 MITSUBISHI 06,19,20 SABA 10
THOMSON 10,15,44
X HOLD
Point the remote control at the unit’s sensor. Avoid obstacles in the path of the
transmission. The maximum range of the remote control is 7 m directly in front of the unit.
Keep the transmission window and the unit sensor clean. The procedure can be impaired
by direct sunlight or doors of glass cabinets.
Operating a television set
Change the remote control code to operate your television set.
! Press and hold the TV on and off switch button.
! Enter the two-digit code for your television set.
The input must be repeated after batteries are changed.
Child lock
You can lock the buttons of the unit and the remote control.
! Press and hold RETURN and ENTER until appears in the display.
The unit is now locked.
! In order to unlock the child lock, repeat the procedure until disappears.
Switching to AV input on your Panasonic television set
Some television models of the brands listed above, (e.g. older Panasonic units), cannot
be operated using the remote control.
! Press AV. Each press of the button switches between TV reception and AV input.
Remote control
signal sensor
30°
30°
7m
X HOLD
If you use another Panasonic device at the same location, change the mode of the
remote control so that you can operate the units independently of each other.
! Press FUNCTIONS in stop mode.
! Use to select [To Others] and confirm with ENTER.
! Use to select SETUP and confirm with ENTER.
! Use to select [Others], to select [Remote Control] and confirm with ENTER.
! Use to select the desired mode [DVD 1, 2 or 3] and confirm with ENTER.
! ENTER button for approx. 2 seconds and, at the same time,
enter the number that corresponds to the selected mode (1, 2 or 3).
! Press RETURN to exit the menu.
Press and hold the
If you want to operate two units independently of each other with the same remote
control, then change the mode of the remote control.
Setting the remote control mode for unit.
Accept the desired mode on the remote control.
! Press and hold the ENTER button for approx. 2 seconds and, at the same time,
enter the number that corresponds to the selected mode (1, 2 or 3).
If the mode of the remote control does not correspond with that of the unit,
[REMOTE DVD 1 / 2 / 3] will appear on the unit display.
Setting the remote control
F
U
N
C
T
IO
N
S
Tuning
Disc
Picture
Sound
Display
Connection
SETUP
Others
On
DVD 1
Clock
Quick Start
Owner ID
Shipping Condition
Remote Control
Default Settings
System Update
SELECT
RETURN
TAB
SELECT
RETURN
TAB
Automatisch
Aus
Deutsch
RETURN
DVD 1
DVD 2
DVD 3
Remote Control
RETURN
SELECT
ENTER
7
The input must be repeated after batteries are changed.