Panasonic DMR-ES20DEB - Manual (Page 11)

Auto-Setup
Ch 4
Suche Sender, bitte warten.
RETURN: abbrechen
35
Digital Auto-Setup in progress, please wait.
RETURN: to abort
RETURN
Download from TV using
! Switch your television on and select the AV channel.
! Switch the device on using the Standby/on switch.
You can download the tuning positions for analogue channels from the TV set.
Time and date will be set automatically by Auto Clock Setting function.
Pos 4
Download from TV
RETURN
Download in progress, please wait.
RETURN: to abort
If Auto-Setup has previously been completed the DVD Recorder will not start
Auto-Setup automatically. In this case you can re-start Auto-Setup again.
If you want to cancel Auto-Setup before it has finished, press the RETURN button.
You can restart Auto-Setup again.
If the clock setting menu appears
(Auto clock set was not possible due to a weak signal)
! Press to set the correct time and date and press ENTER to finish this setting.
Note: A wrong date or time will influence the programmed recording of TV programmes
(don't forget to change summer time and winter time).
You can complete the Owner ID now or skip this step and do it later. To do it later, press the
RETURN button. Your DVD Recorder is now ready to use.
To set the Owner ID now, use and press the Numeric buttons or to enter a four-
digit PIN number. Press , to correct the digit.
! Make sure that you will remember the PIN number (make a note of it).
! Press the ENTER button twice to confirm.
! Enter the [Name], [House No] and [Postcode] in the same way, using .
! Press the ENTER button to confirm each entry.
! Press the RETURN button to leave the Owner ID screen.
! You will now see the TV picture. Your DVD Recorder is now ready to use.
!
Owner ID
(Registered trademark of Panasonic)
Note that you must first perform a station search if you use the TV for the first time.
If you have a Panasonic television, [Download from TV] will be displayed automatically at
the beginning of the station transfer.
Setup with Q Link
Clock
Off Automatic
0 00 00 1 1 2005 : : . .
Time Date
CHANGE
ENTER
RETURN
Clock cannot be set automatically.
Please set the clock manually.
ENTER: store RETURN: leave
SELECT
0 9
No
Owner ID
RETURN
Name
House No.
Postcode
PIN number * * * *
RETURN : leave
The unit starts the station transfer. A station search for the digital channel starts first.
The number of channels found is displayed on the screen after the station search.
Then the analogue station positions are automatically transferred from the television.
The station transfer is complete when the Owner ID screen appears.
Auto-Setup
Ch 4
Suche Sender, bitte warten.
RETURN: abbrechen
35
Digital Auto-Setup in progress, please wait.
RETURN: to abort
RETURN
Auto-Setup
Ch 4
Suche Sender, bitte warten.
RETURN: abbrechen
35
Analogue Auto-Setup in progress, please wait.
RETURN: to abort
RETURN
If Auto-Setup has previously been completed the DVD Recorder will not start Auto-
Setup automatically. In this case you can re-start Auto-Setup again. If you want to
cancel Auto-Setup before it has finished, press the RETURN button.
You can restart Auto-Setup again.
If the clock setting menu appears
(Auto clock set was not possible due to a weak signal)
! Press to set the correct time and date and press ENTER to finish this setting.
Note: A wrong date or time will influence the programmed recording of TV programmes
(don't forget to change summer time and winter time).
You can complete the Owner ID now or skip this step and do it later. To do it later, press the
RETURN button. Your DVD Recorder is now ready to use.
! To set the Owner ID now, use and press the Numeric buttons or to enter a four-
digit PIN number. Press , to correct the digit.
! Make sure that you will remember the PIN number (make a note of it).
! Press the ENTER button twice to confirm.
! Enter the [Name], [House No] and [Postcode] in the same way, using .
! Press the ENTER button to confirm each entry.
! Press the RETURN button to leave the Owner ID screen.
! You will now see the TV picture. Your DVD Recorder is now ready to use.
Owner ID
The automatic setup saves all available TV stations. If the station also broadcasts date and
time, then the clock is also set automatically.
! Switch on your television and select the AV channel.
! With the Standby/on switch turn on the DVD Recorder.
Automatic tuning for all available TV stations begins. The search is first performed for the
digital and then the analogue stations. The number of channels found is displayed on the
screen after the station search. Approximate duration is 5 minutes.
After Automatic tuning has finished, the Owner ID screen will appear.
Auto-Setup
Setup without Q Link (Automatic Tuning)
11
43
43
Clock
Off Automatic
0 00 00 1 1 2005 : : . .
Time Date
CHANGE
ENTER
RETURN
Clock cannot be set automatically.
Please set the clock manually.
ENTER: store RETURN: leave
SELECT
0 9
No
Owner ID
RETURN
Name
House No.
Postcode
PIN number * * * *
RETURN : leave