Polaris Scrambler 9922461 - Manual (Page 44)

40
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the ATV is in safe operating condition
before operating increases the risk of an accident. Always inspect the
ATV before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/lever travel Ensure proper operation 29
71
Brake fluid Ensure proper level 32
Auxiliary brake Ensure proper operation 31
Front suspension Inspect, lubricate if necessary 61
Rear suspension Inspect, lubricate if necessary 61
Steering Ensure free operation -
Tires Inspect condition and pressure 75
Wheels/fasteners Inspect, ensure fastener tightness 75
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 34
64
Coolant level Ensure proper level 84
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 28
73
Indicator lights/switches Ensure operation 26
Engine stop switch Ensure proper operation 26
Drive chain Check condition/slack, lubricate as
needed
81
Air filter, pre-filter Inspect, clean 78
Air box sediment tube Drain deposits whenever visible -
Headlamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
27
87
Brake light/tail lamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
88
Riding gear Wear approved helmet, goggles, and
protective clothing
8