beautypg.com

Maintenance, Carburetor – Polaris Scrambler 9922461 User Manual

Page 84

background image

80

MAINTENANCE

Carburetor

Your Polaris ATV is calibrated at the factory for optimal performance at

altitudes ranging from zero to 6,000 feet (1800 m) and temperatures of

+40 degrees F. (4 degrees C.) or higher. Above 6000 feet (1800 m) the

engine air/fuel mixture becomes overly rich and the engine loses

approximately 3% of its power for each 1000-foot (304.8 m) increase in

elevation. Although this power cannot be regained, adjustments to the

carburetor and drive system can be made to allow more efficient opera-

tion. Optional jets, available from your Polaris dealer, are required for

operation above 6,000 feet and temperatures below +40 degrees F. (4

degrees C.)

Tip: Continuous operation of the engine without proper jetting when required

can cause poor performance, overheating or PVT or engine damage. See

your Polaris dealer for more information about jetting the ATV for conditions

in your area.

Carburetor/Engine Idle RPM Adjustment

If the engine idle speed is not satisfac-

tory, and all other conditions are favor-

able, the carburetor can be adjusted.
1. Place the transmission in gear. Lock

the parking brake.

2. Start the engine and allow it to warm

up for approximately five minutes.

3. Turn the screw in (clockwise) to

raise RPM. Turn the screw out

(counterclockwise) to lower RPM.

Idle

Adjuster