Network configuration – Polycom SVP010 User Manual
Page 25
Configuring the SpectraLink 8000 SVP Server
PN: 1725-36031-001_H.doc
25
SVP-II Configuration
Allows you to set the mode and reset the system.
Network Configuration
Allows you to set network configuration options, including IP
address and hostname.
Change Password
Allows you to change the password for SVP Server access.
Network Configuration
The IP address and other network settings are established via the
Network Configuration
screen. This is also where you may optionally
establish a hostname and enter the IP address of the location of any
software updates you may obtain from Polycom. See Chapter 5
Software Maintenance for more information about installing software
updates via TFTP.
Scroll to
Network Configuration
and select by pressing Enter. A screen
similar to the following appears: