Panasonic KX-FT21HK - Manual (Page 18)

Power cord
To the single
telephone line
Connect to “LINE”.
To the power outlet
(220 – 240 V)
Telephone
line cord
Handset cord
18
Setup
Connections !
1 Connect the handset cord.
2 Connect the telephone line cord.
3 Connect the power cord.
Note:
● When you operate this product, the power outlet should be near the product and easily
accessible.
Dialling mode !
(touch tone or pulse)
1 Press .
Display:
2 Press , then .
3 Press .
4 Press or to select “PULSE”.
5 Press .
6 Press . MENU
SETUP ITEM [ ]
START/COPY/SET
MODE=TONE
▼▲
START/COPY/SET
DIALING MODE
1 3
SYSTEM SET UP
MENU
MENU
START/COPY/SET
/
Note:
● To return to TONE, select “TONE” in
step 4.
This feature is set to “TONE” as a pre-selected setting. If you cannot dial, change the dialling
mode setting to “PULSE” by following the instructions below.