Hyundai HGP-230 - Manual (Page 33)

[58] [59]
RESERVED CALL AND ALARM SETUP
ENTERING ALARM SETUP
The alarm function sounds an alarm at a designated time. The alarm
sound stops when the user presses any key except the Power key. The
alarm will sound for 1 minute. The reserved call function will allow an
alarm to sound. The user presses any key except the power key then
the phone will automatically dial the number that the user set up.
Press [MENU] then [4]
then [2] then [2] then [2] .
Using scroll keys, select the alarm
location and press
[STO] .
● Up to 10 alarm warnings can
be entered.
● If there are more than 2 empty
alarm locations,
Ꭰ Ꭱ sign is
displayed.
After entering time, press
[STO]
.
● To move to next item, press
[STO]
.
● You can add or subtract number
using scroll key.
Select either AM or PM by using the
scroll key and press
[STO] .
1
2
Alarm location
Current time
3
RESERVED CALL AND ALARM SETUP
If you set the answering status to silent (LED or LED +
Backlight) mode, the handset will alert according to the
setting at the designated time in alarm status.
Press [MENU] then [4] then [2]
then
[1]
.
Select the parameter (ON, OFF) by
using the scroll keys. Press
[STO] .
● When you select ON , the alarm
setup, sign is displayed on
the screen.
1
2
ALARM SETUP
CHECKING ALARM WARNINGS
Press [MENU] then [4]
then [2] then [2] then [1] .
Select alarm location number using
scroll keys.
● If there are more than 2 alarm
warnings Ꭰ Ꭱ is displayed.
1
2
This function sounds an alarm at the set time and displays alarm con-
tents on the screen. In case of reserved call, you can use this function
after acquiring the system.
ALARM ON?
̈ YES
[STO] ᎡOK
Ꭰ ALARM XX Ꭱ
10/25, 11:00AM
No Message
Ꭰ ALARM XX Ꭱ
5:00AM
Select Alarm
[STO] ᎡOK