Hyundai HGP-230 - Manual (Page 14)

[20] [21]
BASIC FUNCTIONS
Displays the number of missed
calls and the time the call was
missed.
● The message will be cleared
when you press the [CLR] or
[END\@] key.
1
MISSED CALL DISPLAY
HOW TO ADJUST VOLUME
You can adjust the volume in two ways: by using the volume
control keys on the side of the handset, or by using the menu.
BASIC FUNCTIONS
When there is an incoming call, the
caller s phone number is displayed
on the screen.
This function notifies you there is an incoming call when you
are on the phone.
● To answer the call, press
[SEND]
when you hear the
beep.
● To switch back to the first caller, press
[SEND]
again.
When phone rings or LED blinks press any key
except Volume or
[END\@]
.
To end the call, press [END\@] .
1
HOW TO ANSWER CALLS
2
If you set up the AUTO ANSWER function in
advance, the call will be answered after the
selected number of rings. (Refer to page 36)
CALLER ID FUNCTION
• The Caller ID number is saved in the call log.
•Customer needs to subscribe to service.
CALL WAITING FUNCTION
CALLER ID
XXX-XXX-XXXX
MISSED
XX CALLS
18:25
OPEN TO ANS
This function allows an incoming call to be answered by
opening the flip cover. To enable this function press
[MENU] ,
[1], [4] and select [YES].
Adjust volume by using the volume control keys
during the following operation.
● During a Call : Earpiece volume adjust-
ment.
● Standby Status : Ringer volume adjust-
ment.
● When the Phone Rings : Ringer volume
adjustment.
● Call status in hands-free : Hands-free
volume adjustment. Press
[END\@]
when the phone rings and it will mute
the ringer.
1
VIBRATOR
This function disables the ringer and vibrates the phone any
time an incoming call is in process. To enable this function
press
[MENU] , [3], [2] and select VIBRATOR or by pressing
the up and down keys at the left upper side of the phone.