Panasonic AJ-HD3700BPE - Manual (Page 37)

– 37 –
VIDEO OUT SD SET UP SDI menu
° This item does not appear when 525p (480/59p) is set for the SD SDI output. Similarly, it does not appear when
1080/50i, 625/50i, 1080/25psf or 1080/25p is the system format. (The output signals are not passed through the
comb filter.)
Key
F1
F2
F3–F4
F5
F6
F7
F8
F9–F10
F11
F12
F13
Key designation
COMB FIL °
B. CLIP
——
SERIAL SYS PHASE
INTERP.
Interpolation
EXIT
——
LINE BLK
STATE
——
Description
For selecting whether to pass the SD output (both of SDI output
and analog composite output) signals through the comb filter.
ON:
The signals are passed through the comb filter and output.
OFF: The signals are not passed through the comb filter.
This is used to select whether signals below the SD output
pedestal level are to be clipped or not.
OFF: The signals are not clipped.
ON:
The signals are clipped.
Adjusts the sync phase of SD_SDI output in relation to the
reference signal.
FINE/COARSE
≥ This can be selected when the function key is pressed together
with the F key.
With the 480/59.94i format: Adjustment can be made from
j 2H-858 to i 1H i 858.
With the 480/59.94p format: Adjustment can be made from
j 857 to +858.
With the 576/50i format: Adjustment can be made from
j 2H-864 to i 1H i 864.
For FINE, adjustments are made in sample increments; for
COARSE, they are made in H increments.
Initiates vertical interpolation during AT playback to reduce the
vertical movement of the playback images.
AUTO: Automatically initiates interpolation in the JOG or VAR
mode.
OFF: No interpolation.
Returns the VTR to the VIDEO OUT SD menu screen.
For transferring to the video output line blanking menu.
NTSC: Lines 10 to 21.
PAL:
Lines 8 to 22.
Transfers the VTR to the VIDEO OUT SD SET UP SDI STATE
menu screen.