Panasonic AJ-HD3700BPE - Manual (Page 106)

– 106 –
INSERT/ASSEMBLE MANUAL EDIT SET UP menu
(3) The following message appears and optimizing is suspended in the following cases:
≥ When the VTR is set to a mode other than PLAY while optimizing is underway.
≥ When optimizing has failed.
≥ When no video signals have been recorded on the tape.
≥ When no CTL signals have been recorded on the tape.
NOT COMPLETE
At times like these, the center value (0) is set as the optimized value.
(4) If the optimizing processing fails to be completed even after 5 seconds, the following mes-
sage appears and optimizing is suspended.
TIME OVER
(5) When the cassette is ejected, the optimized value is canceled.
∑ Manually adjusting the tracking
(1) Insert the tape, and play it back.
(2) Press the F10 (TRACKING) key and set it to VAR.
(3) Turn the ADJUST control, and adjust it so that the envelope level is set to its maximum.
VAR
TRACKING
5
4
3
2
1
R E C E N V
ADJUST