Palsonic PDP4290HD - Manual (Page 22)

Sound Adjustments
20
Using the volume buttons (VOL+ and VOL- )
Press the VOL+ or VOL- to increase or decrease the volume.
Using the MUTE
Press the MUTE button to temporarily turn off all sound. To restore the sound, press the MUTE button again.
Press MENU and the main menu screen displays.
Press to select AUDIO menu, press to access the menu.
Within the menu, press or to navigate through the options,
press or to adjust an option.
Sound Mode Select Selects a desired sound mode. You can select from Music, Movie, Speech and Custom.
Music: Select for a music program.
Movie: Select for a movie program.
Speech: Select for a speech or conversation program.
Custom: The sound quality you set.
Note: To quickly change the audio mode, press the SOUND button repeatedly.
Five-Band Equalizer
(100Hz, 500Hz, 1KHz,
5 KHz, 10KHz)
You can adjust the sound quality to your preference by adjusting the Five-band Equalizer.
SPDIF Mode Select the digital audio output mode for S/PDIF. You can select from Auto, AC3, MPEG.
Auto: Output audio signal as its original format. If both AC3 and MPEG are available, AC3 is
auto selected.
AC3: Output audio signal by AC3 form (if available).
MPEG: Output audio signal by MPEG form (if available).
Note: To select Auto is recommended.
HP Volume
Adjust headphones volume.
Adjusting the Volume
Customizing the Sound
3
2
1
Option Description
T
Sound Mode
100Hz
1KHz
500Hz
5KHz
Balance
10KHz
SPDIF Mode
HP Volume
94%
79%
50%
79%
94%
50
19%
Custom
Auto