Palsonic PDP4290HD - Manual (Page 20)

Channel and Program Selection
18
Please note: your new TV is capable of receiving both radio and TV broadcasts. And for TV reception, your new TV is capable
of receiving both traditional analog channels and digital channels.
When watching digital TV program and you want to listen to radio program, simply press TV/Radio button to
switch. To return to TV program, press TV/Radio button again. (When watching analog TV program, the TV/Radio
button does not work.)
The TV allows channel and program selection in the following ways:
Method 1 - Using CH or CH
Press the CH or CH to cycle among all available channels. The skipped channels can not be selected by Channel up/down
button.
Method 2 - Using RECALL button
Press RECALL to switch to the previously tuned channel.
Press RECALL again to switch back to the currently tuned channel.
This button will not work if no channel has been changed after TV is turned on.
Method 3 - Using 0 - 9 and OK button
Press the 0 - 9 number buttons to input a channel number, then wait for some seconds or press OK to go directly to that
channel.
When both analog and digital channels have same channel number, input the channel number first time and the TV will
tune to the digital channel. While the digital program is displayed, input the same channel number a second time and the TV will
tune to the analog channel.
When selecting, the TV will indicate the channel through the information banner.
When in Radio mode, you can press TV/Radio button to switch to TV mode.
If you input one-digit or two-digit channel number, you can press OK to go directly to the
channel without waiting.
Method 4 Using channel list
Press LIST button to display the channel list (or you can make use of OSD main menu -
SETUP menu to open the channel list). Use or to select a channel and then press OK.
If the channel list has more than one page, you may press or to scroll the page upward or
downward.
Method 5 - Using favourite channel list
After you have created the favourite channel list, you can press FAV.LIST button to display
the favourite channel list (or you can make use of OSD main menu - SETUP menu to open
the favourite channel list). Use or to select a channel and then press OK.
You can directly press FAV+/- button to cycle among the favourite channels.
Channels List - TV
2. TV 3
8. TV 7
22. TV 9
29 TV 10
Move Up
Move Down
Channels List - TV
1. TV 2
2. TV 3
7. 7 Digital
8. TV 7
70. 7 HD Digital
71. 7 Digital 1
72. 7 Digital 2
73. 7 Digital 3
22. TV 9
29 TV 10
Favorite
Move Up Skip
Move Down