Speakers, Subwoofer (optional) – PACKARD BELL MX User Manual
Page 15
1414141414
Packard Bell EasyNote MX Disassembly Manual
14
2. Disconnect the 2 flat cables and separate the part from the top cover (see
Note: The touchpad area and the buttons are separate parts: the touchpad area is part of the top cover. To
replace the touchpad area, disconnect all flat cables on the top cover and replace the entire top cover.
Speakers
To remove the speakers, first remove the battery (see
), the HDD (see
), the CD-
ROM or DVD drive (see
), the wireless network card (see
), the installed
memory (see
), the CPU (see
), the keyboard (see
), remove the LCD screen
(see
), the main board top cover up to step 7 (see
), and then perform
the following steps:
1. Disconnect the speaker cable from the main board (see
2. Remove the 2 screws on both speakers and remove the speakers.
Fig. 23 Location of speaker assembly screws.
Subwoofer (Optional)
To remove the optional subwoofer, first remove battery (see
), the HDD (see
), the
CD-ROM or DVD drive (see
), the wireless network card (see
installed memory (see
), the CPU (see
), the keyboard (see
), remove the
LCD screen (see
), the main board top cover up to step 7 (see
), and
then perform the following steps:
1. Disconnect the subwoofer cable from the main board.
Fig. 24 Disconnecting the subwoofer cable.