PACKARD BELL MX - Manual (Page 10)

99999
Packard Bell EasyNote MX Disassembly Manual
9
4. There are 4 small slots at the location shown in Fig. 11 ; insert a small flat-blade screwdriver in
each slot to unlatch the keyboard.
Fig. 11 Location of latches securing keyboard cover.
5. Tilt the keyboard gently forward.
6. Before removing the keyboard entirely, carefully disconnect the keyboard flat cable from the main
board.
LCD Screen Assembly
To remove the LCD screen assembly, remove the battery (see Battery ), disconnect the wireless antenna
cables (see WLAN Card ), and then perform the following steps:
1. Turn the notebook upside down.
2. Remove the 4 screws shown in
Fig. 12 .
Fig. 12 Removing 4 bottom screws.
3. Turn the notebook over so the top is facing up.