Philips SL50i - Manual (Page 30)

30 ENGLISH
12.3.2 Static (IP) settings
If you select Static (IP) as your Network Mode in Network > Change Network Settings >
Network Mode, you will need to provide the SL50i with the following manual settings for its
wireless network:
IP Address This is the fixed IP Address you want the SL50i to have in your
network. Preferably, choose one from the range 192.168.000.xxx.
Netmask Enter the same netmask throughout your network. E.g.:
255.255.255.000
Gateway Enter the IP Address of your Internet gateway router, Wireless Base
Station, or network host computer. (E.g.: 192.168.0.1 for the host
computer that provides Internet Connection Sharing.)
DNS 1 Usually, this would be the same address as the Gateway Address
above. However, some Internet Service Providers (ISP) provide you
with separate Dynamic Name Server addresses you need to use.
This should be a valid IP Address, like xxx.xxx.xxx.xxx
DNS 2 See DNS 1.
IP ADDRESS
192168 XXX
NETMASK INPUT
255 255 255 000
GATEWAY INPUT
192 168 0 1
DNS INPUT
192 168 0 1