Panasonic NV-FJ610PMP - Manual (Page 8)

8
-
-
+
+
Remote Controller Setup
Installing the Batteries
Insert the batteries with the polarity ( + and -)
correctly aligned.
Power Source for the Remote Controller:
The remote controller is powered by 2 “AA”,
“UM3” or “R6” size batteries. The life of the
batteries is about one year, although this
depends on the frequency of use.
Precautions for Battery Replacement:
≥
Load the new batteries with their polarity ( +
and -) aligned correctly.
≥ Do not apply heat to the batteries, or an
internal short circuit may occur.
≥ If you do not intend to use the remote
controller for a long period of time, remove
the batteries and store them in a cool and dry
place.
≥ Remove spent batteries immediately and
dispose of them.
≥ Do not use an old and a new battery together,
and never use an alkaline battery with a
manganese battery.
≥ Do not use rechargeable batteries.