Philips FTR9964/69S - Manual (Page 7)

6
Installation
Automatic installation
Install Start
Install
Manual installation
Install
Selection mode
System
Programme
Search
Fine tune
Store
You can now search for and store the TV channels in two different ways:
using Automatic Installation or Manual Installation (tuning-in channel by
channel).
Select your choice with the cursor right.
After the new or extra TV channels have been stored, the TV automatically transfers
those TV channels to the video recorder if it is equipped with the EasyLink function.
The message EasyLink: downloading ...... appears on the screen. The programme list
of the video recorder is now the same as the one of the TV.
Automatic installation
&
Select Automatic installation in the Install menu.
Note: All channels must be unlocked in order to autoprogram. If requested, enter
your PIN code to unlock all channels. (See TV, Features menu, Childlock, p. 18.)
é
Press the cursor down.
The autoprogramming option label
Start appears.
“
Press the cursor right.
‘
The message Searching appears and the progress of autoprogramming is
displayed.
When the Automatic installation is complete, the puck navigates to
Install
again.
If a cable system or a TV channel which broadcasts ACI (Automatic Channel
Installation) or a TV channel transmitting a teletext page with the frequencies
and programme names of all the TV channels which can be received, is
detected, the search is stopped and the programme list appears.
The programme list is automatically filled with all the programme numbers
and names of the TV channels transmitted.
It is possible that the cable company or the TV channel displays a broadcast
selection menu. Layout and items are defined by the cable company or the TV
channel. Make your choice with the cursor and press the OK key.
Manual installation
Searching for and storing TV channels is done channel by channel.
You must go through every step of the Manual Installation menu.
&
Select Manual installation in the Install menu.
é
Press the cursor down.
Follow the instructions on screen.
Note: Search or direct selection of a TV channel
If you know the frequency, the C- or S-channel number, enter the 3 digits of the
frequency directly with the digit keys 0 to 9 (e.g. 048). Press the cursor down to
proceed.
Repeat to search for another TV channel.
Store TV channels
1008.3 gb /69 08-07-2002 14:20 Pagina 6