Philips FTR9964/69S - Manual (Page 19)

18
Use of the menus
Features
Programme
Sleeptimer
Subtitle
Child lock
On timer
Lock
Custom lock
Unlock
Lock after
Programme lock
TV
18
Features menu
Select the menu items in the Features menu with the cursor up/down and
adjust the settings with the cursor left/right.
Programme list
This list will display all the stored TV channels.
Select a programme number with the cursor up/down.
Press the OK key to switch over to the selected TV channel or external.
Sleeptimer
With the sleeptimer you can set a time period after which the TV should
switch itself to standby.
The counter runs from
0 min. up to 180 min .
One minute before the TV is set to go to standby, the remaining seconds and
a message appears on screen.You can always switch off your set earlier or
change the set time.
Note: When a VGA source is selected, the TV will not go to standby when the
sleeptimer expires.
Select subtitles
TV channels with teletext often transmit programmes with subtitling. For
each TV channel you can store a subtitle page which will be displayed
continuously if the programme being broadcast is transmitted with subtitles.
Switch on teletext and select the proper subtitle page from the index.
Switch off teletext.
Now the subtitle page is stored for the selected TV channel.
Once subtitles have been stored and Subtitle On has been selected they will
automatically be displayed on the selected TV channels if subtitles are in the
transmission.
A symbol will indicate that the mode is on.
Select On during mute when you want to have the subtitles automatically
been displayed when the sound has been temporarily interrupted with the
¬ key on the remote control.
Child lock
The Child lock feature allows you to lock TV channels and externals to
prevent children from watching certain programmes. A VGA source can not
be locked.
&
Select Child lock with the cursor down.
é
Press the cursor right to enter the Child lock menu.
You’re summoned to enter your code. Enter the access code.
Note:You have to re-enter your code each time you’ve left the child lock menu.
Important:You have forgotten your code !
• Select Cancel with the cursor down.
• Select Set/Change code in the Setup menu.
See General menu, Set/Change code, p. 10.
“
Select one of the menu items of the child lock menu.
• Select
Lock if you want to lock all channels and externals.
• Select Custom lock and press the cursor right.
- Select Programme lock if you want to lock the programmes from a
certain TV channel or external.
- Select Lock after if you want to lock all programmes from a certain time
onwards.
Press the cursor right and enter the time with the cursor up/down and
right. Press the OK key to validate.
Note: The entered time will remain valid for every day, untill you have selected
Unlock .
• Select Unlock to unlock all locked channels and externals at once.
Features
Programme
Sleeptimer
Subtitle
Child lock
On timer
TV
Off
On
On during mute
1008.3 gb /69 08-07-2002 14:20 Pagina 18