beautypg.com

Connect peripheral equipment – Philips FTR9964/69S User Manual

Page 29

background image

28

Connect Peripheral Equipment

Connect Peripheral Equipment

There is a wide range of audio and video equipment that can be connected
to your receiver.The following connection diagrams show you how to
connect them to the back or the front side of the receiver.

Note: in case of the monitor in a stand alone situation without the receiver box

connected, see the instructions with the monitor.

Philips Cinema Combination

If you dispose of a Home Cinema combination (Cinema Link audio receiver
and/or Cinema Link video recorder and/or DVD player), see the separate
supplied instruction manual.

Note: Do not place your video recorder too close to the screen as some video

recorders may be susceptible for signals out of the display. Keep a minimum
distance of 0.5 m to the screen.

Connect the supplied aerial cables 1, 2 and, to obtain a better picture
quality, a eurocable 3 as shown opposite.

If your video recorder is provided with the EasyLink function, the eurocable supplied
with it, should be connected to

EXTERNAL 2

to benefit of the EasyLink function.

Only if you do not connect the eurocable 3, you have to do the following:

Search for and store the test signal of the video recorder

&

Unplug the aerial cable 1 from the aerial socket x of your video
recorder.

é

Switch on your TV and put the video recorder on the test signal.
(See the handbook for your video recorder.)

Search for the test signal of your video recorder in the same way as you
searched for and stored the TV signals. See Installation, Searching for and
storing TV channels, Manual Installation, p. 6.

Store the test signal under programme number 0 or between 90 and 99.

(

Replace the aerial cable in the aerial socket x of your video recorder after
you have stored the test signal.

Decoder and video recorder

Connect a eurocable 4 to your decoder and to the special euroconnector
of your video recorder. See also the video recorder handbook.
See Decoder, p. 11.
You can also connect your decoder directly to

EXTERNAL 1

or

2

with a

eurocable.

Video recorder

VCR 1

DECODER

CABLE

1

EXTERNAL

4

2

3

2

1008.3 gb /69 08-07-2002 14:20 Pagina 28