Philips FTR9964/69S - Manual (Page 30)

29
Connect Peripheral Equipment
With euroconnector
Connect your DVD player with a eurocable to one of the euroconnectors
EXTERNAL 1 or 2 .
With Component Video Output Connectors (EXTERNAL 5)
&
Connect the three separate component video cables to the DVD player’s
Y , U (Pb) and V (Pr) jacks and to the Y , Pb and Pr jacks on the receiver.
é
Connect the audio cable to the DVD player’s audio L and R jacks and to the
L and R audio EXTERNAL 5 jacks on the receiver.
Note: The Y, Pb, Pr jacks on the receiver are compatible with 480i (interlaced, 1 Fh)
output signals only, NOT 480p (Progressive Scan, 2 Fh).
DVD Player
2 1
DVD
OUT
EXTERNAL 5
L
R Pr
Pb
Y
&
Connect your camera or camcorder to the FRONT input behind the door
at the front side of your receiver. Press the centre of the door to open.
é
Connect the equipment to VIDEO IN
2 and
AUDIO L
1 for mono
equipment.
“
For stereo equipment also connect AUDIO R 1.
S-VHS quality with an S-VHS, Hi-8 or Digital camcorder is obtained by
connecting the S-VHS cables with the
S-VHS input 3 (instead of
VIDEO IN
2) and
AUDIO inputs 1.
Camera & camcorder
S•VHS VIDEO IN AUDIO L R
1 2 3
Video recorder and other peripherals
EXTERNAL
2 1
VCR 1
CABLE
≈
1 5
2
4
3
&
Connect the aerial cables 1, 2 and 3 as shown opposite. Better
picture quality can be obtained if you also connect eurocable 5 to
EXTERNAL 2 and a eurocable 4 to EXTERNAL 1 , 3 or 4 .
é
Look for the test signal of your peripheral in the same way as you do for a
video recorder.
When a video recorder is connected to EXTERNAL 1 you can only record a
programme from your TV tuner.
Only when a video recorder is connected to
EXTERNAL 2 it is possible to record a
programme from your TV as well as from other connected equipment. See Record
with your video recorder, p. 34.
Note: EXTERNAL 1 can handle CVBS and RGB, EXTERNAL 2 CVBS,Y/C and RGB,
EXTERNAL 3 and 4 only CVBS, EXTERNAL 5 YUV.
1008.3 gb /69 08-07-2002 14:20 Pagina 29