Maintenance – Polaris Sportsman 9921483 User Manual
Page 171
168
Maintenance
Battery
Battery Installation and Connections
1. Set the battery in its holder.
2. Connect and tighten the red (positive) cable first.
3. Connect and tighten the black (negative) cable last.
4. Attach the hold-down strap.
5. Verify that cables are properly routed.
NOTE:
When installing a new battery, make sure it's fully charged prior to its initial use. Using a new
battery that has not been fully charged can damage the battery and result in a shorter life. It
can also hinder vehicle performance. If recharging is necessary, use a .5 amp battery
charger.
Battery Storage
Whenever the vehicle is not used for a period of three months or more, remove the battery
from the vehicle, ensure that it's fully charged, and store it out of the sun in a cool, dry place.
Check battery voltage each month during storage and recharge as needed to maintain a full
charge.
- 2007 ATV Outlaw 90 2007 ATV Sportsman 90 2005 ATV Sportsman 90 2005 ATV Predator 50 2005 ATV Predator 90 2006 ATV Predator 50 2006 ATV Predator 90 2006 ATV Sportsman 90 Sprotsman 90 Predator 50 2000 ATV Universal ATV 1998 ATV Scrambler 500 Offroad Vehicle Sprotsman 700 Scrambler 50 2003 ATV Predator 90 Predator 9920872 Outlaw 9921488