Features and controls – Polaris Sportsman 9921483 User Manual

Page 85

Features and Controls

Kick-Start Lever

If the battery becomes too weak to start the engine, use the

kick-start lever to start the engine until the battery is serviced.
1. Position the vehicle on a level surface.
2. Shift the transmission to neutral.
3. Lock the parking brake.
4. Fold out the kick-start lever on the left side of the ATV.

NOTE:

A 10/12mm wrench is provided in the tool kit for removing

or installing the lever. If not installed, make sure the rubber

cap is on the kick-start shaft to protect the rider. Store the

lever under the seat when it’s not installed.

5. Push the engine stop switch up to the ON position.
6. Turn the key to ON.
7. Place your foot on the kick-start, then thrust your heel

downward to crank the engine.

8. After the engine has started, fold the kick-start lever back into place.

Kick-Start Lever

This manual is related to the following products:

2007 ATV Outlaw 90 2007 ATV Sportsman 90 2005 ATV Sportsman 90 2005 ATV Predator 50 2005 ATV Predator 90 2006 ATV Predator 50 2006 ATV Predator 90 2006 ATV Sportsman 90 Sprotsman 90 Predator 50 2000 ATV Universal ATV 1998 ATV Scrambler 500 Offroad Vehicle Sprotsman 700 Scrambler 50 2003 ATV Predator 90 Predator 9920872 Outlaw 9921488