Maintenance – Polaris Sportsman 9922475 User Manual
Page 124
121
Maintenance
CVT Drying
There may be some instances when water is accidently ingested into the CVT system. Use
the following instructions to dry it out before operating. The drain plug is located on the bot-
tom of the CVT cover.
1. Remove the drain plug. Allow the water to drain. Reinstall the drain plug.
2. Shift the transmission to neutral.
3. Start the engine. Apply varying throttle for 10-15 seconds to expel the moisture and air-
dry the belt and clutches. Do not hold the throttle wide open for more than 10 seconds.
4. Allow the engine RPM to settle to idle speed.
5. Test for belt slippage. If the belt slips, repeat the process.
6. Take the vehicle to your dealer for service as soon as possible.
NOTICE: Exposure to salt water will cause corrosion to metal components. If your vehicle is operated
in salt water areas, rinse it off frequently with fresh water.
- 2007 ATV Outlaw 90 2007 ATV Sportsman 90 2005 ATV Sportsman 90 2005 ATV Predator 50 2005 ATV Predator 90 2006 ATV Predator 50 2006 ATV Predator 90 2006 ATV Sportsman 90 Sprotsman 90 Predator 50 2000 ATV Universal ATV 1998 ATV Scrambler 500 Offroad Vehicle Sprotsman 700 Scrambler 50 2003 ATV Predator 90 Predator 9920872 Outlaw 9921488 Sportsman 9921483 2011 ATV Outlaw 50 Outlaw 9921811 Sportsman 9921796 Outlaw 9922485 2013 ATV Outlaw 50 2011 ATV Sportsman 90 2011 ATV Outlaw 90 2012 ATV Outlaw 50 2011 ATV Outlaw 525 IRS Outlaw 450 MXR Outlaw 9922479 Outlaw 9922079 Outlaw 9922483 Outlaw 525 S Outlaw 9921801 2012 ATV Sportsman 90 2012 ATV Outlaw 90 2013 ATV Outlaw 90 2013 ATV Sportsman 90 2014 ATV Outlaw 90 2014 ATV Sportsman 90 2015 ATV Outlaw 50 2016 ATV Outlaw 50 2016 ATV Outlaw 110 2016 ATV Sportsman 110