Operation – Polaris Sportsman 9922475 User Manual
Page 79
76
Operation
Starting the Engine
NOTICE: Operating the ATV immediately after starting could cause engine damage. Allow the engine
to warm up for several minutes before operating.
1. Shift the transmission to neutral.
2. Lock the parking brake.
3. Turn the fuel valve on.
4. Sit on the vehicle. Attach the tether strap to
the ATV and to your wrist.
5. If the engine is cold, use full choke by
pushing the choke lever all the way to the
left. A warm engine will not require the use
of the choke.
Tip: The choke is fully on when the lever is pushed completely to the left. The choke is off when the
lever is pushed completely to the right. The choke can be adjusted gradually, depending on how
much choke is needed for starting.
6. Push the engine stop switch up to the ON position.
Full Choke
Choke Off
- 2007 ATV Outlaw 90 2007 ATV Sportsman 90 2005 ATV Sportsman 90 2005 ATV Predator 50 2005 ATV Predator 90 2006 ATV Predator 50 2006 ATV Predator 90 2006 ATV Sportsman 90 Sprotsman 90 Predator 50 2000 ATV Universal ATV 1998 ATV Scrambler 500 Offroad Vehicle Sprotsman 700 Scrambler 50 2003 ATV Predator 90 Predator 9920872 Outlaw 9921488 Sportsman 9921483 2011 ATV Outlaw 50 Outlaw 9921811 Sportsman 9921796 Outlaw 9922485 2013 ATV Outlaw 50 2011 ATV Sportsman 90 2011 ATV Outlaw 90 2012 ATV Outlaw 50 2011 ATV Outlaw 525 IRS Outlaw 450 MXR Outlaw 9922479 Outlaw 9922079 Outlaw 9922483 Outlaw 525 S Outlaw 9921801 2012 ATV Sportsman 90 2012 ATV Outlaw 90 2013 ATV Outlaw 90 2013 ATV Sportsman 90 2014 ATV Outlaw 90 2014 ATV Sportsman 90 2015 ATV Outlaw 50 2016 ATV Outlaw 50 2016 ATV Outlaw 110 2016 ATV Sportsman 110