Panasonic FP0 Series - Manual (Page 22)

Notes:
■ A power cable (order number AFP0581) is enclosed with the control unit and the relay output type upgrade units (Transistor output type upgrade units do
not require a power cable).
■ Two Phoenix terminals (9-pin) are needed with the relay output type terminal type. A 2.5mm width screwdriver is needed for the wiring.
Have ready a dedicated terminal screwdriver (order number AFP0806: Phoenix order number SZS0, 4 X 2.5 compatible), or equivalent.
■ A loose-wiring pressure socket and contact (2 pins with order numbers FP0-C16T/P, E16T/P, and 4 pins with order numbers FP0-C32T/P, E32T/P) are needed
with the transistor output type. A loose-wiring connector pressure contact tool (order number AXY52000) is needed for the wiring.
FP0 Control and Expansion Units
Products and order numbers
Expansion units
Relay output type
Transistor output type
Relay output type Input only type
Transistor output type
10 points
Input 6 points
Terminal type
Order number: FP0-C10RSA
Terminal type
Order number: FP0-C10CRSA
with 2nd RS232C interface
Terminal type
Order number: FP0-C14CRSA
with 2nd RS232C interface
PNP/NPN output type
Order number: FP0-C16PA (PNP)
FP0-C16TA (NPN)
PNP/NPN output type
Order number: FP0-C32PA (PNP)
FP0-C32TA (NPN)
PNP/NPN output type
Order number: FP0-C32CPA (PNP)
FP0-T32CPA
(PNP, 10K)
FP0-C32CTA (NPN)
FP0-T32CTA
(NPN, 10K)
with 2nd RS232C
interface
Terminal type
Order number: FP0-C14RSA
Output 4 points
10 points
Input 6 points Output 4 points
14 points
Input 8 points Output 6 points
14 points
Input 8 points Output 6 points
16 points
Input 8 points Output 8 points
16 points
Input 8 points Output 8 points
32 points
Input 16 points Output 16 points
32 points
Input 16 points Output 16 points
8 points
Input 4 points
Terminal relay type
Order number: FP0-E8RSA
Terminal relay type
Order number: FP0-E16RSA
Order number: FP0-E16XA
PNP/NPN output type
Order number: FP0-E8YPA (PNP)
FP0-E8YTA (NPN)
PNP/NPN output type
Order number: FP0-E16PA (PNP)
FP0-E16TA (NPN)
PNP/NPN output type
Order number: FP0-E16YPA (PNP)
FP0-E16YTA (NPN)
PNP/NPN output type
Order number: FP0-E32PA (PNP)
FP0-E32TA (NPN)
Order number: FP0-E8XA
Output 4 points
16 points
Input 8 points Output 8 points
8 points
Input 8 points
16 points
Input 16 points
8 points
Output 8 points
16 points
Output 16 points
16 points
Input 8 points Output 8 points
32 points
Input 16 points Output 16 points
PNP/NPN output type
Order number: FP0-C16CPA (PNP)
FP0-C16CTA (NPN)
with 2nd RS232C
interface
Control units
FP0_broschüre_4093 euen0904 15.10.2004 8:44 Uhr Seite 22
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: [email protected]