Polycom 9.0.6 - Manual (Page 41)

Getting Started Guide for the VSX Series
© Polycom, Inc. 37
Placing a Video Call with the SoundStation VTX 1000 Conference Phone
If your Polycom video conferencing system and SoundStation VTX 1000 have
been configured to work together, you can use the conference phone to place
video calls.
To place a video call using the SoundStation VTX 1000 phone:
1. Leave the SoundStation VTX 1000 conference phone on hook.
2. On the conference phone keypad, enter one of these:
— The ISDN number (for example, 19784444321) of the system you want
to call
— The IP address (for example, 10*11*12*13) of the system you want to
call
3. Press the VID CALL soft key on the conference phone to place the call.
Adding Sites to a Video Call Using the SoundStation VTX 1000 Conference
Phone
You can add video or audio-only sites to a video call using the SoundStation
VTX conference phone.
To add video or audio-only sites:
1. Place a video call to the first site using the SoundStation VTX conference
phone or the video conferencing system.
2. On the conference phone, enter the number of the site you want to add.
— To call a video site, enter the number and press the VID CALL soft
key.
— To call an audio-only site, enter the number and press the Phone
button on the phone keypad.
Use the SoundStation VTX 1000 conference phone to make volume
adjustments after adding an audio-only site to a video call.