3 video standard, 4 language, 5 remote control id – Planet Technology DVR-471 User Manual
Page 37: 6 key echo, 7 advanced setup
4/16-ch H.264 Digital Video Recorder
4.3.3 Video Standard
Select from “AUTO”, “NTSC” or “PAL”. The default is “NTSC”. If you select “AUTO”, this
DVR can detect NTSC/PAL automatically.
4.3.4 Language
Select the system language. Available languages: ENGLISH, POLISH, SPANISH,
RUSSIAN, CHINESE (T) (Traditional Chinese), FRENCH, TURKISH, GERMAN, ITALIAN,
PORTUGUESE.
4.3.5 Remote Control ID
If you are operating more than one DVR in the same place and wish to use the remote
controller, the remote controller ID setup is required. Otherwise, do not change the default
set value and “ALL” should be selected.
Creates the Remote controller ID:
Select one of the numbers 11~14, 21~24, 31~34, 41~44, and then press the same number
button on the supplied remote controller before the operation.
4.3.6 Key Echo
- ON: The beep sounds when you press any buttons on the front panel.
- OFF: The beep does not sound.
4.3.7 Advanced Setup