Planet Technology DVR-471 - Manual (Page 31)

4/16-ch H.264 Digital Video Recorder
Auto Sequence Display
- Press the SEQ button, each screen display will be automatically switching according to
the AUTO SEQUENCE setup.
- Press the SEQ button and again to exit the AUTO SEQUENCE mode.
NOTE : 1. If an event takes place, the AUTO SEQUENCE mode will be cancelled.
2. Do not set 0 SEC to any display mode.
4.2.2 Display
To decide which information will be displayed on the screen:
HDD Free Space
If the value is ON, the remaining capacity of the fixed HDDs will be displayed on the screen.
The default is ON.
HDD Free Space Mode
The default is “PERCENT”.
PERCENT: Remaining capacity of the fixed HDDs will be displayed on the screen in percent.
GIGABYTE: Remaining capacity of the fixed HDDs will be displayed on the screen in gigabyte.
Record Status
ON: Displaying the recording status of each channel on the screen. The default is ON.
Clock Display
ON: The date and time will be displayed on the screen. The default is ON.