Polaris Sportsman 9921837 - Manual (Page 44)

42
OPERATION
Starting the Engine
NOTICE: Operating the vehicle immediately after starting could cause engine
damage. Allow the engine to warm up for several minutes before
operating.
1. Position the vehicle on a level
surface.
2. Place the transmission in PARK
(or neutral).
3. Sit on the vehicle.
4. Apply the brakes.
5. Move the engine stop switch to
RUN.
6. Do not press the throttle while
starting the engine.
7. Turn the ignition key past the PARKING
LIGHTS ON position to engage the
starter. Activate the starter for a maxi-
mum of five seconds, releasing the key
when the engine starts.
8. If the engine does not start, release the
starter and wait five seconds.
9. Repeat steps 7 and 8 until the engine
starts.