Introduction of xmoperation 37, Xmoperation 37, Swiching the xmchannel select – Pioneer DEH-P360 User Manual

Page 37: Setting 37, Introduction of xmoperation, Other functions

Introduction of XMoperation

You can use this unit to control a XM satellite di-

gital tuner (GEX-P910XM), which is sold

separately.

For details concerning operation, refer to the

XMtuners operation manuals. This section

provides information on XMoperations with

this unit which differs from that described in

the XMtuners operation manual.

1 XM tuner information

Shows the XMtuner information which has

been selected.

2 XM channel number indicator

Shows to which XMchannel number the

tuner is tuned.

! If a channel number 100 to 199 is se-

lected, d will light up above the last two

digits of the XMchannel number.

! If a channel number 200 or more is se-

lected, d will blink above the last two di-

gits of the XMchannel number.

XMoperation

XMoperation of the following function with

this unit differs.

Swiching the XMchannel select

setting

You can switch if you select a channel with a

channel number or from a channel category

when you select a channel.

1 Press CLOCK and hold to switch the

channel select setting.

2 Press CLOCK to select the desired chan-

nel select setting.

Press CLOCK repeatedly to switch between

the following channel select settings:

CHNUMBER (channel number select setting)

CATEGORY (channel category select

setting)

Other Functions

English

Section