Ex) 26, Introduction of audio adjustments, Compensating for equalizer curves (eq-ex) – Pioneer DEH-P360 User Manual

Page 26: Audio adjustments

Introduction of audio

adjustments

1 SFEQ indicator

Appears in the display when SFEQ function

can be activated.

2 Loudness indicator

Appears in the display when loudness is

turned on.

3 SW indicator

Shows when the subwoofer output is turned

on.

4 Audio display

Shows the audio adjustments status.

5 EQ-EX indicator

Appears in the display when EQ-EX function

can be activated.

6 CUSTOM indicator

Shows when custom equalizer curve is cur-

rently selected.

% Press AUDIO to display the audio func-

tion names.

Press AUDIO repeatedly to switch between

the following audio functions:

FAD (balance adjustment)EQ-L (equalizer

curve adjustment)B (bass and treble level

adjustment)LOUD (loudness)SUB, W

(subwoofer on/off setting)/NOFAD (non fading

output on/off setting)80: 0 (subwoofer set-

ting)/NOFAD (non fading output setting)

HPF (high pass filter)SLA (source level ad-

justment)

# If EQ-EX function has been selected and only
when EQ-EX is turned on and CUSTOM is se-
lected as the equalizer curve, you can switch to
B.
# When the subwoofer controller setting is only
P/O :FUL, you cannot switch to SUB, W. (Refer to
page 34.)
# You can select the 80: 0 only when subwoofer
output is turned on in the SUB, W.
# When the subwoofer controller setting is only
P/O :FUL, you can switch to the non fading out-
put on/off setting. (Refer to page 34.)
# You can select the non fading output setting
only when non fading output is turned on in the
non fading output on/off setting.
# When selecting the FMtuner as the source,
you cannot switch to SLA.
# To return to the display of each source, press
BAND.

Note

If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.

Compensating for

equalizer curves (EQ-EX)

The EQ-EX compensates for each equalizer

curve. Furthermore, you can adjust bass and

treble for each source when CUSTOM curve is

selected.

! If SFEQ has been previously selected, press

EQ-EX and hold to switch to EQ-EX and

EQ-EX appears in the display.

% Press EQ-EX to turn EQ-EX on.

EQ-EX:ON appears in the display. EQ-EX is

now on.

# To turn EQ-EX off, press EQ-EX.

Audio Adjustments

Section