Fine adjusting equalizer curve 29, Adjusting bass and treble 29, Adjusting bass and treble level 29 – Pioneer DEH-P360 User Manual

Page 29: Selecting bass frequency 29, Adjusting bass and treble, Audio adjustments, Fine adjusting equalizer curve, Adjusting bass and treble level, Selecting bass frequency

Fine adjusting equalizer curve

You can adjust the center frequency and the Q

factor (curve characteristics) of each currently

selected curve band (EQ-L/EQ-M/EQ-H).

Level (dB)

Center frequency

Q=2N

Q=2W

Frequency (Hz)

1 Press AUDIO and hold until frequency

and the Q factor (e.g., F- 80:Q1W) appears

in the display.

2 Press AUDIO to select the band for ad-

justment from among low, mid and high.

Press AUDIO repeatedly to switch between

the following functions:

LowMidHighB (bass adjustment)T

(treble adjustment)

# If EQ-EX function has been selected and only
when EQ-EX is turned on and CUSTOM is se-
lected as the equalizer curve, you can switch to B
and T.

3 Press c or d to select the desired fre-

quency.

Press c or d until the desired frequency ap-

pears in the display.

Low: 4080100160 (Hz)

Mid: 2005001k2k (Hz)

High: 3k8k10k12k (Hz)

4 Press a or b to select the desired Q fac-

tor.

Press a or b until the desired Q factor ap-

pears in the display.

2N1N1W2W

Note

If you make adjustments, CUSTOM curve is up-
dated.

Adjusting bass and treble

You can adjust bass and treble settings.

! If EQ-EX function has been selected and

only when EQ-EX is turned on and

CUSTOM is selected as the equalizer

curve, you can adjust bass and treble set-

tings.

! If SFEQ has been set to FRT1, bass adjust-

ment affects only the rear output: front out-

put cannot be adjusted.

! If SFEQ has been set to FRT1 or FRT2, tre-

ble adjustment affects only the front out-

put: rear output cannot be adjusted.

Adjusting bass and treble level

You can adjust the bass and treble level.

1 Press AUDIO to select B.

Press AUDIO until B appears in the display.

# If the treble level has been previously ad-
justed, T will be displayed.

2 Press c or d to select bass or treble.

Press c and B is displayed. Press d and T is

displayed.

3 Press a or b to adjust the level.

Each press of a or b increases or decreases

the selected bass or treble level. +6 6 is dis-

played as the level is increased or decreased.

Selecting bass frequency

You can select the bass frequency for level ad-

justment.

Audio Adjustments

English

Section